Invicta Itaya 41" Cast Iron Wood Burning Stove 6110-44
Sophisticated and unique, our Itaya cast iron stove provides a touch of exquisite warmth to any interior.
Exceptional design, the chimney-stove ITAYA, creates a unique and warm atmosphere in your home.
Invicta designers have thought about the form and function of every piece of the Itaya Wood Burning stove. The large fire chamber allows for logs up to 71cm in length and a baffle system which is designed to swirl the gases in the fire to give a captivating flame display. At 12kW the Itaya is a stove suited to the larger room and can hold logs of 71cm.
The Itaya features a subtle air wash system which keeps the large viewing window in this magnificent log burner crystal clear. The air introduced by the clear pane air wash system acts as a secondary air system and increases the efficiency of the appliance by ensuring a more complete combustion of gases within the stove. This also reduces smoke emissions.
The Invicta Itaya is made of cast iron and the well designed yet obstructive legs raise the large firebox well off the ground.The Itaya Wood Burning EPA Stove features a firebox and baffle system designed to swirl the flames and give a captivating display. Made by stove manufacturer Invicta in France.
8 hour extended burning
The unit can operate in slow combustion mode for 8 hours without adding more fuel or other external intervention. There will be a bed of embers after this period. This is enough to reload the unit with fuel to relight it.
Adjustable secondary air
Secondary air protects the glass against smoke and soot deposits. It ensures combustion of volatile materials. The adjustable secondary air flow can adapt the unit’s operation to high draft conditions.
The clean glass system slows deposit buildup on the glass. An air supply above the glass creates a protective curtain. The preheated air is propelled along the glass. It triggers combustion of gas and volatile materials, thereby protecting the glass against smoke and soot deposits.
Origine France Garantie (Made in France Guarantee)
The Origine France Garantie is the only certification that certifies a product was manufactured in France. This labeling is validated by an independent organization, after an audit. (Bureau Veritas No.7208672). OFG products are manufactured in France at Invicta Group manufacturing sites.
Injection of pre-heated air into the combustion chamber The supplementary air intake in the back enables hydrocarbons to be destroyed at a high temperature. Complete combustion reduces pollution.
Cold rolled steel panel. High temperature anthracite epoxy paint coating. Sometimes you just can't make it work with the clearances required of your wood stove. That's where this Invicta rear heat shield comes in. This shield provides and extra layer to safety during the use of your appliance.
Flue adaptor give you the best venting system possible to get that smoke safely out of your home Invicta makes this 8 inch flue adaptor. This attaches to the flue collar of your Invicta stove and adapts the size of the collar to the stovepipe. Keep your home safe and smoke free.
|OPTIMAL POWER||12 kW|
|POWER MODULATION||8 to 18 kW|
|HEAT VOLUME||160 - 360 m³|
|HEATING SURFACE||65 to 145 m²|
|GREEN FLAME||7 stars|
|CONCENTRATION OF POWDERS||30 mg/Nm³|
|COMBUSTILE||Logs 25, Logs 33, Logs 50 cm|
|MAXIMUM LENGTH OF THE LOGS (HORIZONTALLY)||71 cm|
|DIAMETER OF NOZZLE||180 mm|
|DIMENSIONS||H 815 x W 1051 x D 431 mm|
Please Note: Do not connect the stove to any hot air distribution system